Showing posts with label inch. Show all posts
Showing posts with label inch. Show all posts
Wednesday, September 30, 2015
How to Make Samoan Money Leis
Get fresh new bills from the bank. Don't use crumpled, limp, torn, or dirty bills for the lei.
Lay each bill out and fold it accordion style in ¼ inch segments.
Tie the ribbon around the center of the bill and knot it twice.
Slide a silk flower onto the ribbon and then tie on the next folded bill. Alternate flowers and bills until you have used up all the bills. You can also alternate pieces of origami paper, folded in the same way as the bills, between the bills and/or flowers.
Tie the ends of the ribbon together with a double knot. Let the bills fan out.
VPS Hosting
Sunday, September 27, 2015
How to Make a Quilt Block by Sewing Strips Together
Cut the strips of fabric to the desired size. Strips can be any size, but ensure the edges are straight for sewing. If the edges are not straight, the finished block may not resemble a square at all. Allow for your seams as you are making the quilt. Each strip will be sewn on two sides initially, so add at least 1/2 inch if you intend to use a 1/4-inch seam allowance in the quilt.
Lay the strips out and arrange them in an order the produces a pleasing look. You may wish to experiment with different layouts until you find the one you feel is best for the quilt you have in mind.
Sew the strips together in the order you have them laid out. Start with the first two strips and sew together along one edge, maintaining the seam allowance. Sew the third strip along the raw edge of the second strip and continue in this manner until all the strips are sewn together.
Cut the strips in the desired length plus the seam allowance. For example, if you need the strips to be 14 inches long for the quilt block, cut them 14 1/2 inches to allow for a 1/4-inch seam. You have already allowed for the seam along the width of the strips so there is no need to add in an additional allowance there. The strips can be cut into small squares for the “nine patch” quilt, triangles for a twisted strip type quilt or left as long strips depending on the finished quilt design you have decided on.
Iron the seams open to flatten them. If you have used contrasting dark and light fabrics, iron the seams towards the darker fabric so they remain as hidden as possible.
Sew the cut pieces together to produce the finished square. Joining the pieces only requires straight stitched seams no matter how complicated the finished quilt block design looks. Once you have the pieces sewn together, measure all four sides of the square to ensure they are all the same. If necessary, trim the square so that all sides are the same length.
VPS Hosting
Friday, September 25, 2015
How to Make a Birthday Money Card Holder Box
Choose two different pieces of paper with contrasting colors or patterns (e.g., purple and yellow or striped paper with white paper). Trim one sheet to 6 by 11 inches. This will act as the exterior of the card. Fold the card in thirds, approximately every 3 2/3 inches.
Trim the top third of the sheet into a triangle with the paper lying vertically beginning one inch from the top fold. The top of the sheet should end in a centered point. This will give the card an envelope-like look when closed.
Cut the second piece of paper into a 6 inches by 3 2/3 inches rectangle. Cut a triangle out of the rectangle so that this sheet is an opposite mirror of the first triangle. Glue the edges of this piece to the center section of the 6 by 11 sheet. The base of this smaller sheet should line up with the center fold. This creates an envelope effect and this is the space in which you can place either the money or gift card.
Close the card and mark where the tip of the envelope meets the bottom of the card. Cut a small slit about 2 cm. above this mark. When the card is completed you will slip the tip of the card into this slit to keep it closed.
Poke two holes below the top fold each spaced a ½ inch from the edges of the card. String a piece of ribbon from the outside to the inside of the card through the hole and tie a small knot inside. Add beads onto the ribbon if desired and string second of string through the second hole and tie inside as well. This allows the card to hang or be carried by the ribbon.
VPS Hosting
Labels:
approximately,
beginning,
centered,
fold,
inch,
lying,
rectangle,
top,
triangle,
vertically
Friday, September 11, 2015
How to Set up a Reward System for Potty Training
Set up your potty training regimen so you’re ready to handle the process. You’ll need a potty seat, at least 10 to 12 pairs of underwear, a sheet of paper, some little stickers and an idea of what rewards you will give to your child. You might stock a box full of inexpensive toys she can choose, you could plan some special excursions and activities as rewards or you might plan a shopping trip as a reward.
Make a one-week sticker chart to keep track of potty success. Hold an 8.5-by-11-inch sheet of paper, oriented in landscape, and divide it into seven equal columns -- one for each day of the week. Write the days of the week across the top of the chart. Your little one will earn a sticker for every potty training success and he will place each sticker he earns in the appropriate column for the day. You will need to make additional sticker charts for the second and third weeks of the process.
Determine what actions will earn stickers. For a reluctant potty trainer, you might award a sticker for just sitting on the potty. For a more advanced child, you might require that the little one actually use the potty to earn a sticker. You also need to decide how many stickers will earn a prize. If you have little, inexpensive prizes, institute a system that requires fewer stickers to earn a prize. If your prizes are larger and more expensive, your child should earn more stickers to earn them. In this scenario, you might create a tiered system with small prizes awarded more frequently for fewer stickers and more expensive prizes earned less frequently when your child earns more stickers.
Talk up the reward system and the potty training plans to get your child on board. Explain the details a day or two in advance and tell your youngster that it’s almost time to begin using the potty.
Begin the potty training routine on the big day. Place the sticker chart on the refrigerator and show your little one the stickers she’ll earn when she sits on or uses the potty. Encourage her to sit on the potty and provide a sticker for every success. Show your child where to affix the stickers and watch as she does this. Remain positive and upbeat as you proceed through the day.
Continue to award stickers for potty training and keep track of the point where your child will be ready for a bigger reward. When this happens, make a big deal out of presenting the prize or the earned activity.
Remain consistent with the sticker chart and rewards for at least three weeks to ensure that your little one’s new skills have the reinforcement needed to make them permanent. Less than three weeks of stickers and rewards could lead to relapse, warns physician Caren Glassman, with Potomac Pediatrics.
VPS Hosting
Subscribe to:
Posts (Atom)